Printer compatibility
Check whether your printer is supported before ordering. FarmLoop uses push and lift detachment depending on the printer family.
Currently supported, Bambu Lab
Section titled “Currently supported, Bambu Lab”| Printer | Status | Methods | Stage 2 |
|---|---|---|---|
| A1 Mini | ✅ Full support | Push + Lift | ✅ Shipping |
| A1 | ✅ Full support | Push + Lift | ✅ Shipping |
| P1S | ✅ Full support | Push only | ✅ Shipping |
| P1P | ✅ Full support | Push only | ✅ Shipping |
| X1C | ✅ Full support | Push only | ✅ Shipping |
| P2S | ✅ Full support | Push only | ✅ Shipping |
Roadmap
Section titled “Roadmap”Bambu Lab
Section titled “Bambu Lab”| Printer | Stage 2 | Stage 3 |
|---|---|---|
| H2S | Q2 2026 | — |
| H2D | Q2 2026 | — |
| H2C | Q2 2026 | — |
| A-series (A1 Mini / A1) | Shipping | Q3 2026 |
Third-party printers
Section titled “Third-party printers”| Printer | Stage 1 | Stage 2 |
|---|---|---|
| Flashforge AD5X | Q2 2026 | Q3 2026 |
| Snapmaker U1 | Q2 2026 | Q3 2026 |
| Elegoo Centauri Carbon | Q2 2026 | Q3 2026 |
| Prusa Core One / One+ | Q2 2026 | Q3 2026 |
Want us to prioritize a printer on this list? Email contact@3d-farmers.com.
Stage 1 vs Stage 2, what’s the difference?
Section titled “Stage 1 vs Stage 2, what’s the difference?”If you’re a long-time customer, some of the older limitations no longer apply with Stage 2 hardware:
| Stage 1 (legacy) | Stage 2 (current) | |
|---|---|---|
| Max part height | 200 mm for P/X series | No height limit |
| Door control (enclosed printers) | Manual | Automatic door opener |
| Toolhead attachment | Magnetic (can pop off on sticky parts) | Reinforced |
| Detachment mechanism | Push | Active plate bending + push |
| Best for | PLA / PETG | PLA / PETG / ABS (thanks to door control) |
Existing Stage 1 customers can upgrade, email contact@3d-farmers.com for upgrade-kit pricing.
Detachment methods explained
Section titled “Detachment methods explained”Push, a linear actuator presses against the back of the part to slide it off the plate. Works for parts with a flat back side and a minimum ~2 mm height.
Lift (A-series only), the actuator lifts the leading edge of the plate, tipping parts off. Handles thinner and more delicate geometry than push.
Active bending (Stage 2), mechanical flex of the plate itself, decoupled from the printer’s own bending. Works even with large flat footprints where push alone can’t overcome adhesion.
Not sure which you have?
Section titled “Not sure which you have?”- Stage 1 kits shipped before November 2025 and don’t include the door-opener module or the reinforced bender holder.
- Stage 2 kits include the bender module with the FarmLoop linear actuator, the door-opener bracket (P/X series), and the reinforced toolhead parts. If you followed the A1 Mini, A1, or P/X-series assembly guide, you’re on Stage 2.
My printer isn’t listed
Section titled “My printer isn’t listed”Email contact@3d-farmers.com with:
- Printer model and manufacturer
- Build volume
- Whether it’s enclosed
- Whether you’re on stock firmware or Klipper
We maintain a public backlog, enough interest moves a printer forward.