Assembly, pick your printer
Step 2 of the Start here flow. Pick the guide that matches your printer.
Bambu A1 Mini
Push + lift detachment on the smallest Bambu. Scraper, linear actuator, PCB wiring, and the A1 Mini routine-test file.
Bambu A1
Same detachment system as the A1 Mini but with full-size A1 hardware fitment and its own routine-test file.
Bambu P1P, P1S, or X1C
Push detachment plus the door-opener module and cooling fan. Per-model differences (screws, cables) are called out inline.
Bambu P2S
Same push detachment as P1P/P1S/X1C, with smaller hinge screws, a different power cable, and no fan module.
Bambu X2D
Door opener, bender, hinge, FarmBoard wiring, and scraper install, with X2D-specific screws and printed parts.
Bambu H2S
H-series with two benders, lid lifter, and a side-panel wire-routing step. Scraper attaches with the original print-head screws.
Bambu H2D
H-series flagship. Scraper replaces the transparent print-head cover; side-panel routing is one combined step.
Bambu H2C
Compact H-series. Scraper attaches directly on top of the print head, and the side-panel wire-routing step is skipped - slightly faster install.
Other printers
Section titled “Other printers”Snapmaker U1
Door opener, bender, lid lifters, and FarmBoard wiring, with the U1-specific kit and printed parts.
Elegoo Centauri Carbon
Door opener, bender, pusher head, and FarmBoard wiring, with the Centauri Carbon kit and printed parts.
Prusa Core One / One+
Door opener, bender, pusher, and custom build plate, plus a PrusaLink setup page for sending prints over the network.
Which guide covers which printer
Section titled “Which guide covers which printer”| Printer | Guide |
|---|---|
| Bambu A1 Mini | A1 Mini assembly |
| Bambu A1 | A1 assembly |
| Bambu P1P | P / X series assembly |
| Bambu P1S | P / X series assembly |
| Bambu P2S | P2S assembly |
| Bambu X1C | P / X series assembly |
| Bambu X2D | X2D assembly |
| Bambu H2S | H2S assembly |
| Bambu H2D | H2D assembly |
| Bambu H2C | H2C assembly |
| Snapmaker U1 | Snapmaker U1 assembly |
| Elegoo Centauri Carbon | Centauri Carbon assembly |
| Prusa Core One / One+ | Prusa Core One assembly |
Approximate time
Section titled “Approximate time”- A1 Mini: 15-30 minutes
- A1: 15-30 minutes
- P / X series (P1P, P1S, X1C): 30-45 minutes per printer
- P2S: 45-60 minutes
- X2D: 45-60 minutes
- H2S, H2D: 45-60 minutes per printer
- H2C: 40-55 minutes (skips the side-panel routing step)
Don’t have the kit yet?
Section titled “Don’t have the kit yet?”You need to have the Stage 2 kit in hand plus the printed hardware parts before starting assembly. If the kit arrived damaged, open a support ticket with photos and your order number before opening anything further.
After assembly
Section titled “After assembly”Come back to the Start here flow for step 3 (firmware update) once you’ve finished mounting.